MAINTENANCE 4.3 FUEL AND LUBRICANTS 4.3 FUEL AND LUBRICANTS NOTICE *1) DO NOT mix up ZINC-FREE Hydraulic oils with Hydraulic oils containing Zinc. DO NOT mix up Mineral Hydraulic oils with Synthetic Hydraulic oils. Mixing of the above oils, will result in diminishing of anti wear properties and oxidation stability of the oil. Quick plugging of the oil filters in the hydraulic system is to be expected. *2) Refer to the chart ”Gear Oils” in part 3 of this binder for the released gear oil qualities and viscosity grades. The lubricating instructions in this book refer to the recommended grade specifications.
Damages caused by using lubricants other than specified are not covered by the manufacturer's guarantee. 239 Lubrication Point Lubricant Ambient Temperature °C Viscosity Grades Quality Grades DIN/API Engine Oil Coolant Fuel Refer to ”Engine Operation and Maintenance Manual" for Specifications. Hydraulic System Hydraulic oil “HLP or “HLPD” with ZINC anti-wear additives *1) - 25 to + 15 22 - DIN-51524 T.2 - HLP -15 to + 25 32 or 32 - 68 -10 to + 30 46 - 5 to + 35 68 + 5 to + 50 100 - Travel gears, Final drives and Swing machinery Hydraulic oil "HLP” - 40 to + 10 HLP T32 DIN 51524.
T.2 - HLP Gear oil ”CLP” *2) -15 to + 50 CLP 220 DIN 51517 3 - CLP Brake housings and Motor adapter hous- ings of Travel Gears Engine oil all SAE 10 or Hydraulic oil HLP 22 or HLP 32 DIN 51524T.2 - HLP PTO (Pump distribu- tor gear) Hydraulic oil ”HLP” - 40 to + 10 HLP T32 DIN 51524. T.2 - HLP Gear oil ”CLP” *2) -15 to + 50 CLP 150 DIN 51517 3 - CLP Fan bearing hous- ings of Radiator and Hydraulic oil cooler Gear oil ”CLP” CLP 150 DIN 51517 3 - CLP