4.6 LUBRICATION AND MAINTENANCE SCHEDULE MAINTENANCE 4.6.3 PERIODIC SERVICING SCHEDULE (1) Perform maintenance according to separate Engine Operation an Mainte- nance Manual filed in volume 2 binder. (2) Perform inspections according to the separate Manual ”FIRE DETECTION AND ACTUATION SYSTEM” filed in volume 2 binder. (4) Perform maintenance according to separate Service Bulletin " Eliminator Filter" filed in volume 2 binder.
244 Service Intervals Service Point Service See When necessary Engine Air Cleaners Maintenance page 255 Swing circle toothing Immediately apply grease if bare spots are visible page 259 Automatic lubrication systems Replace or fill grease containers Clean or replace filter elements page 261 Track rollers If leakage occurs replace floating seals and fill with GL SAE 90 EP or ISO VG CLP 220 page 265 Carrier rollers Guide wheels Cold starting aid Replace fluid cartridge The fluid cartridge is located on the LH air cleaner carrier. (1) Every 10 operating hours or daily Shovel Walk-around inspection page 267 Working attachment Check grease injectors of auto- matic lubrication system.
Lubri- cate backhoe bucket linkage. page 271 Swing circle Check grease injectors of auto- matic lubrication system. page 275 Air cleaner Clean pre-cleaner page 277 Radiator Check coolant level page 279 Track groups Clean, esp.
in winter page 279 Fuel system water separator Drain water page 281 Engine Check oil level (1) Eliminator filter Maintenance check (4) Every 50 operating hours or weekly Swing machinery and Motor adapter housings Check oil levels page 283 Travel gears, Brake housings and Motor adapter housings Check oil levels page 287 Final drives Check oil level page 289 PTO (Pump distributor gear) Check oil level page 291 Hydraulic access ladder Check safety sensor page 293 Hydraulic oil cooler and radiator Check and clean as necessary page 295