Komatsu — 4.8.1 WALK-AROUND INSPECTION

MAINTENANCE 4.8 EVERY 10 OPERATING HOURS OR DAILY 4.8.1 WALK-AROUND INSPECTION Legend for illustration Z25475 (1) Check condition of the loader bucket. Both loader bucket versions, bottom dump bucket and backhoe bucket are equipped with wear protection pack- ages as specified in the contract. These wear packages protect the base body of the bucket from premature wear and tear. Therefore it is important to check the condition of the wear protection elements regularly. Worn or damaged protection elements should be replaced at an early stage in order to prevent damage to the base body of the bucket. In case the bucket base is already weakened, reconditioning measures will be necessary.

Contact your Komatsu dealer for support. (2) Hydraulic cylinders. Check cylinders, hydraulic lines and connections for leakage and damage. (3) Working attachment. Check overall condition. Inspect for loose or missing securing parts. (4) Check guide wheels for leakage. (5) Check connecting pins, center frame - crawler carrier for proper mounting. Inspect for loose or missing securing parts. (6) Check swing circle toothing for adequate lubrication. (7) Check track rollers and carrier rollers for leakage. NOTICE If leakage is found on guide wheels or rollers inspect the floating seals of the respective unit, replace if necessary. Fill the unit with the correct gear lubri- cant.

(8) Check track pad connection pins for wear and security. (9) Check final drives for leakage. (10) Check oil level in engine oil reserve tank of the automtic engine oil supply system "RESERVE" (11) Check condition, fastening and security of access ladder. (12) Check condition, fastening and security of all walk-ways, steps, railings and hand rails. (13) Check condition and fastening of engine air cleaner. (14) Check operation of hydraulic access ladder. (15) Check radiator coolant level. Check cooling system for leakage, damaged hoses and connections. (16) Check housing of radiator fan bearing for leakage. Check fan guards and coverings for correct installation, good condition and security.

(17) Check swing machinery for leakage. 267