Komatsu — 4.9.1 SWING MACHINERY AND MOTOR ADAPTER HOUSINGS - CHECK OIL LEVELS

MAINTENANCE 4.9 EVERY 50 OPERATING HOURS OR WEEKLY Swing Machinery manufactured by "Siebenhaar" Legend for illustration Z 21656 (A) Position of oil level gauge for checking the oil levels (1) Swing machinery (2) Brake housing (3) Compensator oil tank for swing machinery (4) Oil level gauge for swing machinery (5) Oil drain plug for motor adapter housing (6) Oil level gauge for motor adapter housing (7) Breather filter for brake housing (8) Oil level gauge for brake housing (9) Oil drain plug for brake housing (10) Breather filter CHECK SWING MACHINERY OIL LEVEL Remove oil level gauge (4) and wipe it clean. Insert the gauge but DO NOT screw in, see detail ”A”. Remove the gauge.

The oil level should be at the upper mark of gauge (4). If necessary add the specified gear oil through filler pipe. Remove breather filter (10). Blow out with compressed air from inside to outside and reinstall. CHECK BRAKE HOUSING OIL LEVEL Remove oil level gauge (8) and wipe it clean. Insert the gauge but DO NOT screw in, see detail ”A”. Remove the gauge. The oil level should be at the upper mark of gauge (8). If necessary add the specified oil through filler opening. Remove breather filter from pipe (7). Blow out with compressed air from inside to outside and reinstall. CHECK MOTOR ADAPTER HOUSING OIL LEVEL Remove oil level gauge (6) and wipe it clean.

Insert the gauge but DO NOT screw in, see detail ”A”. Remove the gauge. The oil level should be at the upper mark of gauge (6). If necessary add the specified oil through filler opening. NOTICE Swing machinery, Brake- and Motor adapter housings have to be filled with different types of oil. Refer to page 239 for the correct oil specifications. 285