MAINTENANCE 4.14 EVERY 3000 OPERATING HOURS HOWEVER AT LEAST ONCE A YEAR BRAKE HOUSINGS - CHANGE OIL See illustration Z 20436 The brakes must be released for changing the oil. 1. Place wedges at front and rear side of both crawlers. 2. Start the engine and lower the bucket onto the ground. 3. Have a second person for control in the operator’s cab. 4. Change the oil. Remove parts (6, 8 and 9) and drain the oil. Install plug (8) and fill in fresh oil up to level opening (6). Install plugs (5 and 6). 5. Shut down the engine. NOTICE Be sure to fill the brake housings and motor adapter hous- ings with engine oil or hydraulic oil as specified on page 239. MOTOR ADAPTER HOUSINGS - CHANGE OIL 1.
Remove parts (5 and 7) and drain the oil completely. 2. Check breather filter, mounted inside center frame, and clean as necessary. 3. Install drain plug (7) and fill-up oil to level opening (5). Recon- nect breather filter hose line to level and filler opening (5). 415 CAUTION CAUTION