. OPERATION EXPLANATION OF COMPONENTS BRAKE PEDAL WARNING These pedals (6) operate the brakes. REMARK speed. 3 - 42 When traveling downhi ll, always use the right brake pedal, an d use the braking force of the engine together w Do not use the brake pe dal repeatedly more than necessary. I f the brake is used too freq uently, the brake will o verheat. If this ll not work, so this may lead to a serio Do not put your foot on this pedal unless necessary RIGHT BRAKE PEDAL The right brake pedal o perates the wheel brakes. Use the right brake ped LEFT BRAKE PEDAL erates the wheel brakes.
The left brake pedal op When the transmission cut-off switch is in the ON positio n, and if t his brake peda l is depressed, whe el brakes are applied and the transmi ssion is set to the neutral position at the same time. If the transmission cut-o ff switch is at OFF, the left brake ped al acts in the same way a s the rig ht brake pedal. When the accelerator is being used for operating the work equipment, always set the transmission cu t-off switch to the ON position and us e the left brake pedal to sl ow or st op the ACCELERATOR PEDAL This pedal (7) controls the engine speed and output. The engine speed can b e freely controlled betwee n low idl e and f ull