Komatsu — HANDLING CAB WIPER

. OPERATION EXPLANATION OF COMPONENTS and insert pin (4) securely into the groove. HANDLING CAB WIPER PREVENTING DAMAGE TO WIPER ARM BRACKET NOTICE When angling the wiper arm to the front, check that the wiper blade is hanging free. When angling the wiper arm to the front, such as when wiping the may break. REPLACING CAB WIPER WARNING 3 - 48 CAB DOOR OPEN LOC This can be used to hold the Open the d oor so that tip (2) of the lever is aligne d with groove (1) of the lock, then pull down k nob (3) as shown in the diagram. When using the door-open lo ck, be sure to apply the lock securely.

When relea sing the lock an (3) glass clean , if the wiper arm is angled with the w iper blade locked to the arm ( the bottom of the blade is caught on th e arm), abnormal force is bro ught to bear on the mounting bracket and the bracket Do not attem pt to replace the c ab wiper, standing on t he front frame. I t is very dangerous to climb o When repla cing the cab wip er, articulate the m achine 40° to the right, place wiper. Be c stand (1) in posi areful not to fall o tion, then stand on i ff the stand. t and replace