Komatsu — OPERATION OF WORK EQUIPMENT

. OPERATION OPERATION OPERATION OF WORK EQUIPMENT WARNING The lift arm moves freely under external force. When the lift arm control lever is pulled further from the raise hold position. NOTICE 3 - 109 When standing up from the o equipment lock lever securely equipment lock lever is not lock (A) is touched by mistake, this m If the work equipment lock lever is perator's seat, always set the work to the LOCK position. If the work ed, and work equipment control lever ay lead to serious personal injury. not set securely to LOCK position (L), the work equipment may move Check that the work equipment lo diagram. and cause serious personal injury.

ck lever is at the position shown in the When pulling the work equipmen t lock lever up or pushing it down, be careful not to touch work equipm ent control lever (1). Work equipment control lock lev er (3) is the locking device for work equipment con Lower the work equipment lock lever to set it to the LOCK position. Lift arm control lever (1) and bu cket control lever (2) can be used to operate the lift arm and bucket as follo LIFT ARM CONTROL LEVER Set the work equipment lock lev er to the FREE position before operating the contr Position (A): RAISE Position (B): HOLD The lift arm is stop Position (C): LOWER Position (D):

FLOAT position, the lever is stopped in this position until the lift arm reaches the preset kick-out pos ition, and the lever is return to the Do not use the FLOAT position whe n lowering the bucket. Use the FLOAT position when leveling, see "LEVEL