. OPERATION OPERATION 3 - 121 ARTICULATING MACHINE DURING DI Do not carry out operations with machine is articulated, the directio n of force will be different for the front wheels and rear wheels. As a will not be transmitted fully to the result, the power when traveling front wheels, so this will reduce the digging force and bring an exc essive load to bear on the center hinge pin. In addition, even with th e front wheels, the power will not be transmitted uniformly to the lef t and right wheels. The load will be brought to bear on one wheel, s o this will reduce the service life of t he tire on one side.
digging work is carried out wit If overall stability of the machine wil l be poor and there is danger of the machine tipping over. When carrying out operations, do not articulate the machine. Drive straight forward and thrust the buc ket in. If this is done, the load on the bucket will be uniform, so this makes it possible to avoid load on one side and makes it easier t BUCKET DUMP ANGLE WHEN DIGGIN Do not set the cutting edge of th ground surface when digging or lo wering the roadbed. Keep angle (a) between the bucket and the gr ound surface to a maximum of 8 °. I f angle (a) between the cuttin ground surface is more than 8° roadbed, there is danger of dama