Komatsu — WORK POSSIBLE USING WHEEL LOADER

. OPERATION OPERATION apply the brakes when when 3 - 123 BUCKET DUMP OPERATION WHEN Do not operate the bucket in the DUMP direction when diggin g. If the b ucket control lever is operated to the DUMP positio n during digging, the mac hine will not be able to travel forward, the tires will slip, and an excessive load will be brought to bear on the work Carry o ut the scooping-up opera 1. When thrusting the bucket i n, raise the lift arm slightly at 2. same time. Ample driving fo To fill the bucket, operate t repeatedly when thrusting th Operate the control lever slo 3. When the bucket reaches th brake pedal to stop the mac When doing this, do not pus the dilution.

If the bucket is bucket, cylinders, and work equipment will be damaged. 4. When the scooping-up oper ation is completed, operate th traveling in reverse to stabili ze the load inside the bucket and prevent spillage of the loa REMAR K To r educe the generation of h eat by the torque converter, k eep the t arget time for the digg ing operation within 10 seconds from the start of thru sting in to the completion of s cooping up. the digging time. The fuel consumption increa ses while digging working. Fu el cost is saved by shortening FRONT WHEELS GOING ON BLAST ED ROCK Do not carry out operations that make the front wheels ride u blasted danger rock.

If the front wheels that the sharp parts of th go on top of blasted rock, the e blasted rock will cut the tire In particular, avoid pushing th e bucket in too far, and w operating near natural rock after blasting (roots), do not let the f wheels l rock (roots). For scoopin ots), do not use a wheel loa avator. Use a bulldozer or hydraulic exc