. OPERATION OPERATION PRECAUTIONS FOR OPERATION PRECAUTIONS WHEN DRIVING UP OR DOWN SLOPES IF ENGINE STOPS 3 - 133 PERMISSIBLE WATER When working in water or on swampy ground, do not let the come above the bottom of the axle housing. After finishing the operatio n, wash and check th e lubricating p IF WHEEL BRAKE DOE If the machine is not stopp ed by depressing th e brake peda l, use the parking brake to sto NOTIC E If the parking brake has been used as an emergency brake, c ontact your Kom atsu distributor to have the parking brake c hecked for an y abnormality.
LOWER CENTER OF GRAVITY WHEN TURNING When turning on slopes, lo wer the work equipment to lower the cente r of gravity before tu rning. It is dangerous to turn t he machine suddenl y on slopes. BRAKING ON DOWNHILL SLOPE oo frequently on downhill slopes, there is danger that the brake will overheat and be If the foot brake is used t slopes, danger be dama ged. To prevent this, use the shift down s witch to reduc e the gea r speed and make ful l use of the brakin g force of the engine when traveli ng downhill. Norm ally, the gear speed when traveling down any hi ll shou ld be set to the s ame gear sp eed used when tr aveling up th at hill. using the brake, depress the right brake pedal.
When using the brake, de press the right brake pedal. If the gear speed is not cor rect, the torque converter o il may overheat. If this happens, shi ft the transmissio n down to on e speed lower to red uce the oil temperatu re. If the indicator does not en ter the green range e ven wh en traveling in 1 st, stop the machine , set the forward-reverse selec tor switch to N, and r un at the engine at a mid-range s peed unti l the gauge enters th e green range. If the engine stops on a sl ope, apply the parki ng brak e immediately, and lower the work equipment to the ground and s top the machine. Th en put the directiona l selec tor switch in N ( neutral) position, an d start the engine again.