. OPERATION OPERATION HANDLING THE TIRES PRECAUTIONS WHEN HANDLING TIRES CAUTION equipment wear or other 3 - 144 If a tire has reached any of the following service limits , ther the tire may burst or cau se an accident, so to ensure safety a new tire. Service limits for we When the remaining tires (at a point appro on a new tire.
When the tire show abnormal wear, or w Service limits for da When there is extern is broken When the cord is cut When the tire is peeli When the bead is da For tubeless tires, w al damage extending to the c ord or hen there is air leakage or improper Please contact your Komatsu distributor when It is dangerous to jac k up the machine without t akin TIRE PRESSURE sure before starting operations, when the tires are cool. Measure the tire pres sure before starting operations If the tire inflation pre ssure is too low, there will be o verload; if it is too high, it will cause tire cuts and shock burst.
To prevent these pro blems, adjust the tire inflation p ressure according to the table on th Deflection ratio = H - As a guideline that ca n be checked visibly, the deflection ratio of the front tire (deflection /free height) is as follows. When carrying norma l load (lift arm horizontal): Approx. 10 to 15 % . 20 to 25 % When digging (rear w heels off ground): Approx . 20 t When checking the ti re inflation pressure, chec k also for small scratches or peeling of th e tire, for nails or pieces of metal which may cau se punctures, and for any abnormal wear.