. OPERATION TROUBLESHOOTING STARTING ENGINE WARNING normal machine and 3 - 167 Check that the lock levers (work e g) and parking b rake levers of both the n machine are at the L OCK position. Check also that al l control levers a re at the problem 1. Make sure the clips are firm ly connected to the batter 2. Start engine o f the normal m achine and run it at high i dle s 3. Turn the starti ng switch of t he problem mac hine to the START position and start If the engine d oesn't start a t first, wait for at least 2 minute DISCONNECTING THE BOOSTER CABLE After the engine h as started, disconnect the boo ster cables in th e reverse of the order in which they were connected. 1.
Remove one clip of booster cable (B) from the engine block of the problem machine. 2. Remove the other clip of booster cable (B) from the negative (-) terminal of the normal machine. 3. Remove one clip of booster cable (A) from the positive (+) terminal of the normal machine. 4. Remove the other clip of booster cable (A) from the positive (+) terminal of the problem machine. 1. Remove one c lip of booster cabl e (B) from t he engine bloc k of the problem m achine. 2. Remove the o ther clip of booster cable (B) fr om the negative (-) terminal of the normal machine. 3. Remove one clip of booste terminal of the normal machine. 4.
Remove the o ther clip of booster cable (A) fr om the positive (+)