. OPERATION TROUBLESHOOTING ACTION CODE DISPLAY (ENGINE SERVICE MONITOR PORTION) WARNING (1) (2) Machine monitor mode selector switch 1 Machine monitor mode selector switch 2 (3) Character display With this display portion, if there is any failure on the machine, and it is necessary to change the method of operation, or inspection and maintenance must be carried out, codes E01, E02, and E03 recommending action are displayed on the character display. If more than one failure has occurred, the action code with the highest level of seriousness is displayed. The order of seriousness for the codes is as follows: E03, E02, E01.
In the case of action codes E02 and E03, the alarm buzzer sounds intermittently and the central warning lamp lights up. If action codes E01, E02, or E03 are displayed on the character display, stop operations, check the content of the display, and take the following action. E03: When this code is displayed, stop the machine immediately, check the failure code, and contact your Komatsu distributor for repairs. REMARK "E03" is displayed on the top line of the character display and "CHECK RIGHT NOW" and "CALL" are displayed on the bottom line for 3 seconds each in turn.
3 - 176 If action code E03 is displayed, stop the machine imm ediately, look at the failure c ode display, and check the failure code. Contact your Komatsu distributor and a sk for repairs t o be carried out.