. MAINTENANCE GUIDES TO MAINTENANCE 4 - 3 DUSTY WORKSITES: o as follows: aution pilot lamp more frequently to check the degree of clogging of the air re frequently. to avoid clogging. equently. ecially the starting motor and alternator, to avoid accumulation of dust. When working at dusty worksites, d Check the air cleaner clogging c cleaner. Clean the air cleaner element mo Clean the radiator core frequently Clean and replace the fuel filter fr Clean electrical components, esp ecially the starting motor and alternator, to a void a ccumulation of dust. When inspecting or changing the oil, move the machine to a place that is f ree o f dus t to prevent dirt from getting into the oil.
AVOID MIXING OIL: If a different brand or grade of oil has to be added, drain the old oil and replace all t he oil with the new br and o r grade of oil. Never mix different brand or g rade of oil. OPENING AND CLOSING OF INSPECTIO N COVER When opening and closing the insp ection cover, take care not to get a hand or fi nger pinched. LOCKING INSPECTION COVERS: Lock inspection cover securely int o position with the lock bar. If inspection or maintenance is performed with with inspection cover not locked in positi on, there is a danger that it may be suddenly blow shut by t he win d and cause injury to the worker. BLEEDING AIR FROM HYDRAULIC CIRC UIT:
After repairing or replacing the parts of hydraulic circuit, or removing the piping o f hydrauli c circuit, it is necessary to circuit. See "BLEEDING AIR FROM HYDRAULIC TANK (PAGE 4-38)" for ANK PRECAUTIONS WHEN INSTALLING HYD RAULIC HOSES: s where there are O-rings or gasket seals, clean the mounting surface, and forget to assemble the O-rings and gaskets. When removing parts at location replace with new parts. When doing this, be careful not to forget to assemble the O-rings and gaskets When installing the hoses, do no t twist them or bend them sharply. If they are installed so, t heir se rvice life will be shortened extremely and they may be damaged.
CHECKS AFTER INSPECTION AND MAIN TENANCE: If y ou forget to perform the checks af ter inspection and maintenance, unexpected p roblems may occur, and this may lead to serious injury or property da mage. Always do the following: ne stopped) tenance points been forgotten? enance items been performed correctly? Checks after operation (with engi Have any inspection and main Have all inspection and maint Have any tools or parts been inside the machine and get ca Are there any leakage of cool Have any inspection and main Have all inspection and maint enance items been performed correctly? Have any tools or parts been dropped inside the machine?
It is particularl y dangerous i f parts are dropped ught in the lever linkage mechanism. ant or oil? Have all nuts and bolts been tightened? g Are there any leakage of cool ant or oil? Have all nuts and bolts been ti ghtened? Check when the engine is runnin See "TWO WORKERS FOR M safety for checking when the e Check if the inspected and ma Increase the engine speed to See "TWO WORKERS FOR M AINTENANCE WHEN ENGINE IS RUNNIN G (PAGE 2-37)" in th e section on ngine is running. Pay attention to safety Check if the inspected and ma Increase the engine speed to