. MAINTENANCE RECOMMENDED FUEL, COOLANT, AND LUBRICANT MAINTENANCE RECOMMENDED FUEL, COOLANT, AND LUBRICANT NOTICE Use only diesel fuel. The engine mounted on this machine employs electronic control and a high-pressure fuel injection device to obtain good fuel consumption and good exhaust gas characteristics. For this reason, it requires high precision for the parts and good lubrication. If kerosene or other fuel with low lubricating ability is used, there will be a big drop in durability. Always use the fuel specified for the temperature in the Operation and Maintenance Manual.
If the fuel is used at temperatures lower than the specified temperature (particularly at temperatures below -15 ° C (5 ° F)), the fuel will solidify. If the fuel is used at temperatures higher than the specified temperature, the viscosity will drop, and this may result in problems such as a drop in output. Note 1: HTHS ( High-Temperature High-Shear Viscosity 150 ° C), specified by ASTM D4741 must be equal to or higher than 3.5 mPa-S. Komatsu EOS0W30 and EOS5W40 are the most suitable oils. Note 2: Powertrain oil has different properties from engine oil. Be sure to use the recommended oils. Note .3:
Axle oil AXO80 has the function of preventing squealing from the brakes and LSD (Limited Slip Differential). If only AXO80 is recommended, use Komatsu genuine AXO80 or equivalent. Note .4: When the ambient temperature is higher than 45 ° C (113 ° F) and the machine operation hour is longer than 12 hours/day, then the use of EO50-CD instead of AXO80 is recommended. Squealing of the brakes may occur with EO50-CD, but there is no problem with the brake performance or durability. Note. 5: If the machine is equipped with automatic greasing system, see "HANDLING AUTO-GREASING SYSTEM (PAGE 6-3)". Note .6: Hyper grease (G2-T, G2-TE) has a high performance.
When it is necessary to improve the lubricating ability of the grease in order to prevent squeaking of pins and bushings, the use of G2-T or G2-TE is recommended. 4 - 12 Reservoir Capacity Engine oil pan Transmission case Hydraulic system Brake oil tank Front axle Specified Liters 140 164 1065 42 360 US gal 36.96 43.3 281.16 11.09 95.0 Refill Liters 130 140 725 31 360 US gal 34.35 36.96 191.4 8.18 95.0 Reservoir Capacity Rear axle Pins Fuel tank Cooling system Specified Liters 360 - 1555 337 US gal 95.0 - 410.83 89.0 Refill Liters 360 - - - US gal 95.0 - - -