Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE CHECK INFLATION PRESSURE OF TIRES WARNING WA800-3E0 Tire size Standard inflation pressure 45/65-45-46PR (L5) (standard) 0.52MPa {5.25kg/cm 2 , 74.55 PSI} 45/65-45-50PR (L5) (if equipped) 0.52MPa {5.25kg/cm 2 , 74.55 PSI} WA900-3E0 45/65-45-58PR (L5) (Standard) 0.67MPa{6.8kg/cm 2 , 96.56PSI} Tire size Standard inflation pressure 45/65R45 AA (L5) (if equipped) 0.64MPa{6.5kg/cm 2 , 92.3PSI} NOTICE The optimum inflation pressure differs according to the type of work. For details, see "HANDLING THE TIRES (PAGE 3-144)". 4 - 43 When inflating a tire, ch eck that no one will enter th e working are a.

Use an air chuck which has a cl ip and which can be fixed t o the air valve . While inflating the tire , check the inflation pressu re occasional ly so t hat it will not rise too hig h. If the rim is not fitted normally, it may be broken a nd scattered while the tire is inflated. To ens ure safety, place a guard aro und the tire a nd do not work in front of the ri m but work on the tread sid e of the tire. f the rim Abnormal drop of in flation pressure and abnor mal fitting o rim indicate trouble in the tire or rim. In this case, be sure to ask a t ire repair shop to carry out rep airs. e specified inflation pressure. lation pressure of the tires just after high-speed work.

Be sure to observe th e specified inflation pressu Do not adjust the inf travel or heavy-duty CHECK Measure the inflation pressure with a tire pres sure gauge , whil e the tires are cool, before s INFLATION OF TIRES essure properly. Adjust the inflation pr When inflating a tire, use an air chuck which c an be fixed to th e air valve of the tire as sho wn in the figure. Do not work in front of the ri m but work on the tread s ide of the ti The proper inflation p ressure is shown below.