Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE WARNING 1. Open the side panel located on the right of the machine and lock the open lock. 2. Set a container under the fuel main filter cartridge to catch the fuel. Turn fuel stop lever (1) toward you to prevent the fuel from dripping. 3. Using a filter wrench, turn filter cartridge (2) counterclockwise to remove it. 4. Clean the filter holder. 5. Coat the packing surface of the filter cartridge with oil. 4 - 63 After the engine has been op erated, all parts are at high temperature, so do not replace the filter im mediately.

Wait for all parts to cool down before starting High pressure is generated i nside the engine fuel piping system when t When replacing the filter, w ait for at least 30 seconds after stopping th e engine to let the intern al pressure go down before replacing the filter. Do not bring any fire or flam NOTICE Genuine Komatsu fuel filter cartridges use a special filter that has high ly efficient filtering abilit y. When replacing the filter cartridge, always use a genu ine Komatsu part. The common rail fuel injecti on system used on this machine consists o f more precise parts tha n the conventional injection pump and nozzle.

If any part other than a genu ine Komatsu filter cartridge is used, dust or dirt may get in and cause problems with the injection system. Always avoid using substitute parts. When carrying out inspectio n or maintenance of the fuel system, pay m ore attention than normal to the entry of dirt. If dirt is stuck to any part, use fuel to wash it off completely. Prepare a container to ca Prepare a filter wrench