Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECKING FUNCTION OF ACCUMULATOR For details of handling the accumulator, see Section "HANDLING ACCUMULATOR AND GAS SPRING (PAGE 2-42)". control lever to LOWER position (c), and lower the work equipment slowly to the ground. REMARK 4 - 82 PPC ACCUMULA TOR If the engine stop s with the work equipment raise d, and it is impossible to start the engin e again, it is possible as an emergency meas stored in equipment to the 1. Apply the par 2. Raise the w ft arm control lever to HOLD po 3. Stop the engi 4. Leave the wo rk equipment lock lever in the 5.

Check that th e area around the machine is s afe, then turn the h to the ON position, set the lift arm control lever ition (d), and lower the work eq uipment to a point above the ground. 6. When the lift arm comes to the 1m position, return the lift arm Carry out the che ck within 2 minutes after stopp ing the engine. If the machine is l eft with the engine stopped, the accumulator pressure will drop and it will be impossible to chec k the cause of the problem. If the work equip ment stops while it is moving, t he gas pressure i n the accumulator ha Please contact y our Komatsu distributor to have the accumulator Replace the accu mulator every 4000 hours or e