. ATTACHMENTS, OPTIONS HANDLING STARTING AID CONNECTOR HANDLING STARTING AID CONNECTOR WA900-3E0 STARTING ENGINE WHEN USING STARTING AID CONNECTOR PRECAUTIONS WHEN CONNECTING OR REMOVING STARTING AID CONNECTOR WARNING 6 - 26 A st arting aid connector that co as a n option f or this machine. The starting a id connector is at the side of the batte ry box on left side of th Ope n cover ( 1), remove cap (2), then connect the ca aid connector D o not allow the normal machine and the problem mach ine to com e into c ontact. ound the battery.
H ydrogen g as is generated from the battery, so there is danger of e xplosio n from sparks ar ound the batte B e careful n ot to mistake the co nnection of the startin g aid connector. In addition, when t he final connection is m ade, it is c onnected t o the problem machi ne, but there is danger of sparks b eing ge nerated when thi s happens. NOT ICE he starting system on this machine is 24V. For the normal machine, use a machine that is also 24V. lways use a starting aid cable of a thickness that is suitable for the size of the battery. or the battery on the normal machine, use a battery with the same capacity as the problem machine.
heck that the cable and connectors are not damaged or corroded. onnect the connectors securely. T he starting system on this mach ine is 24V. For the nor mal machin e, use a machine that is A lways use a starting aid cable o f a thickness that is su itable for th e size o f the battery. F or the batt ery on the normal ma chine, use a battery wi th the same capaci ty as the problem C heck that t he cable and connec tors are not damaged o r corroded. C onnect the connectors securely C heck that t he lock levers (work equipment, steering) o f both machines ar e at the LOCK po sition and tha t the parki ng brake s witches of both machines are O N (actuated). utral position.
C heck that a ll levers are at the ne CONNECTING STARTING AID C Tur n the start ing switches of bot h the normal machi ne and the proble m machine to t he OFF position and connect the starting a id cables in the ord er normal machine → problem