Komatsu — MACHINE MONITOR

. OPERATION EXPLANATION OF COMPONENTS BRAKE OIL PRESSURE CAUTION PILOT LAMP This lamp (5) warns the operator that the brake oil dropped. 3 - 13 pressure has When carrying out chec ks before starting: ped, the brake oil pressure circuit is not pilot lamp and central CHECK lamp are When the engine is stop actuated, so the caution also off. is not lamp are When operating: goes down, the caution pilot lamp and If the brake oil pressure and central CAUTION lamp will flash, and the alarm buzzer will sound intermittently. If the monitor lamps flash, stop the engine . ngine immediately and check t he brake oil pressure circuit REMARK The monitor lamp may fl ash and go out after approx .

30 seconds immediately after the en gine is started. This is because pressure is ake accumulator. It does not indicate any indicate any ENGINE OIL PRESSURE CAUTION PILOT LAMP operator that the engine lubricating oil ine and check. ights up g: This lamp (6) warns the pressure has dropped. If it flashes, stop the eng Check before starting: L Engine started or runnin When the engine is start ed, the lubrication pressure i s formed and the lamps go out.

If the engine lubrication pressur e d rops, the warning pilot lamp and c lash and the buzzer will sound interm BATTERY CHARGE CAU TION PILOT LAMP This lamp (7) warns the o perator that there is an abnormality in the charging system when t he engine is running. ights up g: Check before starting: L Engine started or runnin When the engine is start ed, the alternator generates e lectricity and the lamp goes out. If any abnormality occur s in the charging system, the caution pilot lamp and central CHEC charging circuit. K lamp will flash. If they flash, check the check the