Komatsu — MACHINE MONITOR

. OPERATION EXPLANATION OF COMPONENTS METERS 3 - 21 FUEL GAUGE vel of fuel in the fuel tank. uel. ll. range should be lighted up. range during operations, the central d fuel gauge lamp flash. This meter (15) shows the le E indicates that there is no f F indicates that the tank is fu During operations, the green If the gauge enters the red warning lamp (CAUTION) an If only the red range lights up during operations, it means that there is US gal) of fuel remaining, so check ENGINE WATER TEMPERAT URE GAUGE ngine water temperature. range should be lighted up.

This meter (16) shows the e During operations, the green If the red range lights up duri ng operations, stop the machine, run the engine under no load at a mid-range speed, and wait for the . the green range to light up again If the first segment of the re d range lights up, the central warning lamp (CAUTION) and engine water temperature gauge lamp flash; if the second segment of th e red range also lights up, the lamps ounds intermittently. flash and the alarm buzzer s TORQUE CONVERTER OIL T EMPERATURE GAUGE rque converter oil temperature. range should be lighted up.

This meter (17) shows the to During operations, the green If the red range lights up duri ng operations, stop the machine, run the engine under no load at a mid-range speed, and wait for the . the green range to light up again If the first segment of the re d range lights up, the central warning lamp (CAUTION) and torque converter oil temperaturegauge lamp flash; if the second segmen t of the red range also lights up, the zzer sounds intermittently. the lamps flash and the alarm bu SERVICE METER This meter (18) shows the to tal number of hours that the machine has been operated. If the engine is running, the machine is not moving.

service meter advances, even if the When the engine is running, t he green operating display above the meter flashes to show that th e meter is advancing. The meter advances 1 for ev ery 1 hour of operation, regardles s of the engine speed.