Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS running. 3 - 25 STARTING S This switch ( 1) is used to start or stop the OFF position The key can be inserted and r emoved at t his position. Whe n the key is turned to this position, all electrical cir cuits are t urned off and the engine s In addition, t he parking brake i s automatic ally applied. ON position In this positi on, electric curren circuit, and a ccessory circuit. Keep the sta rting switch key at the ON posi tion while the engi ne is For machine s equipped with a prelube sys The engine prelube system is actuated.

Fo r details, see "STARTING ENGINE ( If the engine water temperatur e is below -5 °C (23°F) when th e engine is started, the pre heating pilot lamp will light up automatic ally and preheatin g will start. The preheat ing time differs ac cording to th e temperature of t he water when t he engine is starte If the prehea ting pilot lamp ligh ts up, wait f or it to go out, then turn the key to the STAR T positio START posi tion This is the en gine-start position . Keep the k ey at this position d uring cranking. Immediate ly after s tarting the engine, release the k ey. It will automatically return to the ON position .