5-4 REMOVAL·INSTALLATION T = N m (kgf-cm) [ft-lbf] 3 T = 29.2 ~ 43.8 (298 ~ 447) [21.5 ~ 32.3] Removal Procedure 1 Remove the front axle ASSY W/drive motor ASSY. (See page 6-5) 2 Put match marks between the drive unit case and stator ASSY. [Point 1] 3 Loosen the through bolt and remove the drive motor. [Point 2] Installation Procedure The installation procedure is the reverse of the removal procedure.