. OPERATION OPERATION In cold weather, the turbo protect function is actuated, so the engine speed is kept at 1000 rpm or below for several seconds. After that, it becomes the speed set by the position of the fuel control dial. 3 - 96 7. Whe n the engin e rotatio n stabilizes, retur n to th e low idl e (MI N) position o f fuel contro l dial ( 1) and then c arry out he w arming-up operatio REMARK Regardless tartin position eft, preheating pilot l amp (3) will light up and preheating will start.
(Preheating continues while t he starting s witc h is held a t the left.) For th e details of the pre heating time, se e the t able i n Step 5 While preheating is bein g carrie d out, th e preheatin g pilot la sho that carrie d out. After it lights up for 3 6 second s, it fl ashes for 16 s econd s and goe s out. When it goes out, c omplete the pr eheating im mediate If the engin e doe s not sta rt with th e above operation, wait for a bout 2 minutes, a nd repeat ste ps from Ste p 3.
A nd 4 elationship temperatur e is a s follows Even if the fuel c ontrol di al is operated wi thin th e tim e given b elow, the e ngine spee d will n REMARK The a ctuation tim e for the turbo p rotect fu nction and t he relationship with t he e ngine c oolan t temperatur e are as show n below. dial is operated within the time shown below, the engine speed will not change. If the fuel c ontrol dial is o perated within th e tim e shown below , the engin e speed will not ch ange. Coolant temperature Turbo protect time (sec.) Above 10°C (50°F) 0 10 to -10°C (50 to 14°F) Change 0 to 5 below -10°C (14°F) 5