Komatsu — METHOD OF LIFTING MACHINE

. OPERATION TRANSPORTATION and METHOD OF LIFTING MACHINE WARNING NOTICE and options standard For weight, see "SPECIFICATIONS (PAGE 5-2)". 3 - 138 PRECAUTIONS FOR LOAD After placin g the machine on the specified position of t he trailer, secure i t according to th e following procedure 1. Lower t he work equipment slo 2. Secure control levers with the work equipment lock 3. Set the parking brake lever to the LOCK position. 4. Turn th e starting switch to the OFF position stoppin g the engine, the n remove the ke 5. Lock th e cab door, left and rig ht engine side covers , and the battery i nspection cover 6.

Place b locks under both end s of the tracks to pre vent the machine the machine with chai ns or wire rope of suit able strength. iculary careful to secur e the machine in pos ition so it does no t slip to the side. Never per form lifting operations wi th any person on the ma chine. Always m ake sure that the wire rop e (cable) used for lifting the machine is of a mple strength for t he weight of the machine. Never try to lift the machine in any posture other than the p osture given in the There is d anger that the machine m ay lose its balance.

When lifti ng the machine,pay caref ul attention to the cente r of gravity to maintain When lifting the machine, perform the operation on flat follows: e engine and be sure to set the parking bra CK position. 1. Stop th the LO 2. Set the on the r 1. Stop th 2. Set the lifting position for the m achine as shown in th ight. This method of lifting applies to the s tandard specification ma The method of lifting differs according to the attachments of the procedure for machines that are not th , please consult your Komatsu distributor. installed. For details specification , please consult your Ko