Komatsu — GUIDES TO MAINTENANCE

. MAINTENANCE GUIDES TO MAINTENANCE 4 - 3 DUSTY WORKSITES: s follows: itor frequently to see if the air cleaner is clogged. horter interval than specified. avoid clogging. uently. ially the starting motor and alternator, to avoid accumulation of dust.

When working at dusty worksites, do a Inspect the air cleaner clogging mon itor frequently to see if the air cleaner is clogge Clean the air cleaner element at a s Clean the radiator core frequently to Clean and replace the fuel filter freq Clean electrical components, espec ially the starting motor and alternator, to avoid a ccumulation of dust When inspecting or changing the oil, move the machine to a place that is free of dus t to prevent dirt from getting into the oil. AVOID MIXING OILS: If a different brand or grade of oil has to be added, drain the old oil and replace all the oil with the new brand o r grade of oil. Never mix different brand or gra de of oil. LOCKING INSPECTION COVERS:

Lock inspection cover securely into p osition with the lock bar. If inspection or maintenance is performed with with inspection cover not locked in position, there is a danger that it may be suddenly blow shut by t he win d an d cause injury to the worker. BLEEDING AIR: When hydraulic equipment has been r epaired or replaced, or the hydraulic piping has bee n removed and i nstalled again, the air must be bled from the c 4-44)". ircuit. For details, see "BLEEDING AIR IN HYDRAULIC SYSTEM (PAGE (PAGE PRECAUTIONS WHEN INSTALLING HY DRAULIC HOSES: where there are O-rings or gasket seals, clean the mounting surface, and rget to assemble the O-rings and gaskets.

When removing parts at locations replace with new parts. When doing this, be careful not to fo When installing the hoses, do not tw ist them or bend them sharply. If they are installed so, t heir service life will be shortened extremely and they m ay be damaged. surface, and CHECKS AFTER INSPECTION AND MAI NTENANCE: If y ou forget to perform the checks after inspection and maintenance, unexpected problems may occur, and t his may lead to serious injury or property dama ge. Always do the following: stopped) nance points been forgotten? nce items been performed correctly?

Checks after operation (with engine Have any inspection and mainte Have all inspection and maintena Have any tools or parts been dro inside the machine and get caug Are there any leakage of coolant Have any inspection and mainte Have all inspection and maintena Have any tools or parts been dro pped inside the machine? It is particularly dangerous i f parts are d ropped ht in the lever linkage mechanism. or oil? Have all nuts and bolts been tightened? perating the engine, see "PROPER TOOLS (PAGE 2-30)" and pay careful nce items working properly? when the engine speed is raised? Are there any leakage of coolant or oil? Have all nuts and bolts been tightened?

Checks when operating engine For details of the checks when o attention to safety. Are the inspection and maintena Is there any leakage of fuel or oil For details of the checks when o Are the inspection and maintena Is there any leakage of fuel or oil 2-30)" and pay careful