Komatsu — REPLACE CHARGE FILTER ELEMENT

. MAINTENANCE SERVICE PROCEDURE REPLACE CHARGE FILTER ELEMENT 4 - 68 1. Remov e inspection cov er (1). 2. Loosen mounting bolt ( 2) and remove filter cover (3). 3. Remov e drain plug (P ) (which can fender) and drain the o 4. Remov e spring (4), the n take out element (5) 5. Clean t he removed par ts and the inside of filter case (6), then install a new element. Use a g enuine Komats u element. 6. Install in spection cover (3) with bolt (2). be seen