Komatsu — CHECK PIVOT BEARING OIL LEVEL, ADD OIL

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE CHECK PIVOT BEARING OIL LEVEL, ADD OIL When removing plug (1), be careful not to let dirt or dust get it. 4 - 73 3. Remo ve dipstick (G), then r emove drain plu g (P) and drain the oil. After d raining th e oil,tighten drain plug (P). 4. Add o il through t he holder of dipstick (G). After addin g the oil, insert dipstick (G 5. Remo ve any dirt or dust stu ck to b reather (5), then w ash w ith clean diesel oi l or flushi ng oil. cleaned completely, repl ace with a new pa 6. Install undercov er (2), then close e ngine si de cover ( 1) on the left sid e of the m Remo When ve plug (1 removing 2.

Check that the o il is at the le vel shown in th e diagram. If the oil level i s low, add engine oil through the hol e of plug (1 Use class CD temperature. (B): 25mm (1inc