. MAINTENANCE SERVICE PROCEDURE 4 - 77 CHECKING FOR LOOSENESS OF HIGH-PRESSURE CLAMP, HARDENING OF RUBBER Check for any looseness in the high-pr essure clamp mounting bolts (1) to (15 ) in below. Check visually and feel with you r finger to check that the rubber has not hardened. If there is any problem, the problem part must be replaced. Co ntact your Komatsu distributor for part replacement. NOTICE If the engine continues to be used when the re are loose bolts, hardened rubber, or missing parts, there is dan ger of damage or breakage occurring due to vibration and w ear at the connections of high-pressure piping. Always check that the proper stalled.
proper high-pressure piping clamps are correctly in piping.