Komatsu — EFFECTIVE USE OF MODE SELECTION SYSTEM

. ATTACHMENTS, OPTIONS SHOE SLIP CONTROL When using shoe slip control, the travel speed for bedrock setting modes [1] - [5] is set at approx. 70 - 90% of the full travel speed. 6 - 19 REVERSE SLO W MODE he travel speed when traveling in reverse, reduces This reduces t n traveling in rever se, reduces the frequency o f operating the decel erator pedal, and i mproves the riding comfort f or the operator. R1, 2, 3 en traveling in R2 or R3, it is Speed rang (If this mode i es that can be used: s only necessary wh possible to ch please contact ange the setting of t your Komatsu distri Applicable steep hills Use this mode to reduce the travel s peed when travelin g in R1, R2, or R3.

When the rev erse slow mode is ON, the travel speed is set to f the full travel speed. approx. 80% o f the full travel speed Use this mode to reduce the travel s peed when travelin g in reverse after ripping an d dozing bedrock or when traveling in r everse after dozing on stee p slopes. The trav el speed differs in each mode according to w hether it is used in c hoe slip control. ombination with the economy mode or with s When traveling on bedrock, if it is f elt that the travel s peed when traveling in rev erse is too high, turn the reverse slow mode ON. erse.

This will reduc e the travel speed w hen traveling in rev When traveling down slopes, if it is felt that the travel speed when traveling in rev erse is too high, turn the reverse slow mode ON. erse. This will reduc e the travel speed w hen traveling in rev