. OPERATION EXPLANATION OF COMPONENTS lines of the (1) Operating mode (normal operation screen) Use this mode when operating the machine. REMARK When starting switch is turned from the OFF position to the ON (2) Maintenance mode The maintenance mode is displayed by continuing to turn the buzzer cancel switch in the ‘ direction for 2.5 seconds. For details, see "METHOD OF USING DISPLAY PANEL B (Multi-information) (PAGE 3-27)". 3 - 18 DISPLAY PANEL B (Multi-in This monitor (9) displays i display portion. The conte nt of the display can be switche d by operating the serv ice mode selector s position, the multi-informati on is set to the operating mode.
The shift mode selected b y operation of the "GEARSHIFTING USING SHIFT MODE SE LECTION (PAGE 3-105)" through the shift mode selection is disp layed on the left side of the monitor . The total operating hours of the machine is displayed at the bottom right of the monitor. (Use t he service meter function displa y to set the interval for periodic mai ntenance.) g, the service meter advances, even if When the engine is runnin the machine is not moving. When the engine is running , the hourglass mark pilot displa y at the side of the meter lights up t o show that the meter is advancing . The meter advances by 1 fo r every hour of operation, regardless of the engine speed.
If there is a failure in the ma chine, the failure code is also displayed on the top line. If a failure c ode is displayed, carry out the r emedy given in "OTHER TROUBL E (PAGE 3-149)".