. OPERATION EXPLANATION OF COMPONENTS JOYSTICK (STEERING, DIRECTIONAL AND GEAR SHIFT LEVER) (PCCS lever) This lever (2) is used to switch between forward and reverse, to steer the machine, or carry out counterrotation turns. REMARK PCCS: Palm command control system Forward-reverse shifting Position (a): FORWARD Position (b): REVERSE Position N: Neutral Move to the front to drive forward; move to the rear to drive in reverse. right to turn the machine. The Gear shifting When the steering, directional, and gearshift lever is at the FORWARD or REVERSE position and switch (c) or switch (d) is pushed, the transmission speed will change. UP switch (c):
Each time the switch is pressed, the transmission will shift up one speed. DOWN switch (d): Each time the switch is pressed, the transmission will shift down one speed. For details of the maximum speed in each speed range, see "SPECIFICATIONS (PAGE 5-2)". 3 - 41 front or rear, operate the lever partially to the left or r n the same direction as the lever is operated. he left or right, the machine will turn in a small radius. artia machine will turn gradually i n the same direction as the lever is operated.
If t he lever is moved fully to t he left or right, the machine will t urn in a small REMARK If the lever is released wh en steering the machine, the leve r will return to the (a) position or th e (b) positio n and the machine will be return ed to straight movement. REMARK When the transmission is shifted, the speed range being u sed i s displayed on th e display pa nel on the m onitor panel. Example: the display panel. played on the display panel. played on the display panel. locked, P is displayed. Neutral: N is displayed on FORWARD 2nd: F2 is dis REVERSE 3rd:
R3 is dis When the parking lever is For details of the gearshi ft operation using the shift mode, see "SHIFTING GEA R (PAGE 3- 104)". Shift mode selection means the oper ation to set the selected speed ra nge beforehand in th e N position.