Komatsu — AFTER STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS AFTER STARTING ENGINE WARNING 3 - 96 Emergency sto If there has be en any abnormal actuation or trouble, t urn the starting switch key to the OFF position Do not carry ou t operations or operate the levers or ped als suddenly while the hydraulic oil is at low te mperature. A lways carry out the warm-u p operation for the hydraulic equipmen t until the hydraulic oil temperatu re monitor is displayed gr If the warm-up operation for the hydraulic equipment i s not carried out thoroughly, and the machine i s moved, the reaction of the control lev ers and pedals will be slow and the mo vement may not be what the op erator intende d.

Always w arm up the hydraulic equi pment. In particular, in cold areas, alwa ys warm up the hydraulic equipm ent thorough There are two ty pes of warm-up operation: warm u p the engine and warm up the hydraulic e quipment. I n addition, depending on t he environment, the method of ca rrying out the warm-up opera tion may differ, so carry out the warm-up operat ion according to the items given in the appropriate section. (When only the engine is warmed up, the hydraulic equipment is not warmed up, so always carry out th e warm-up operation for the hydraulic equipment separately fro m the warm-up operation for t he engine.

Warm up the hydraulic equipment thor oughly ensures that the hydraulic oil is warmed up and that warm hydraulic oil circulates in all the m hydraulic oil circulate control circuits.) Checking of Engine Startability and Noise When starting th e engine, check that the engine cau ses no abnormal noise and th at it starts u p easily and smoothly. Check also that there is no abnormal noise when t he engine is idling or when th e revolution rises slightl y. e may be When there is an abnormal noise at the engin e startup and if that conditio n continues damaged.

In that case, ask your Komatsu distri butor to check the engine as Checking of Engine Acceleration and Decel eration When stopping the machine during the operation, ch eck that there is no irregular e ngine revolution or that the engine does not stop s uddenly. the engine speed rises smoothly when the fuel control dial is turned to the full (Max). se checks in a safe place, watching out for danger in the surroundings.

gine performs very badly at low idling and in the acceleration and if that condition continues, the Check also that the engine speed rises smoothly w hen the fuel control dial is tur ned to the f Carry out the se checks in a safe place, watchin g out for danger in the surrou When the en gine performs very badly at low id ling and in the acceleration a engine may be damaged or confuse the operator 's sense of driving or lower the braking efficiency, and as a result lead to an u possible. nexpected accident. In that case, ask your Komatsu distributor to check the engine as soon as