. OPERATION MACHINE OPERATIONS AND CONTROLS or by distributor for repair. 3 - 109 Moving Machine Forw 1. Set lock lever (4) in equipment, and rais ground. If the work equipm fficult to se the work equipment to a greate r height. 2. Operate the right and left travel levers (5), or the right or lef t travel pedals When sprocket (A) is situated at the rear of the machin Start the machine eith er by pushing lever (5) f orward s lowly or b y stepping on the fro nt part of pedal (6) slowl When sprocket is situa ted at the front of the m achine; Start the machine eith er by pulling lever (5) b art of pedal (6) slowly. ack slow stepping on the rear p 3. Check that the travel alarm sounds properly.
If the tra vel alarm does not sound, please co ntact your Komatsu REMARK he machine travel speed is not normal, thoroughly perform the warming-up operation. In cold temperatures, if t he machine travel speed is not n ormal, thoroughly p erform the warmi ng-up operatio In addition, if the underca rriage is clogged with mu d and th e machine travel sp eed is not normal, remove the so il and mud from the undercarri age.