. OPERATION MACHINE OPERATIONS AND CONTROLS Operations Digging at an Angle without Engaging Teeth the work equipment. It is better to excavate it after the machine from damage but will make for better Operations When Machine is Not Stable Do not carry out operations when the machine is not in a stable position. This will generate a twisting load on the frame and other parts and will reduce the service life of the machine. When carrying out operations in such a place, pile soil under the or take other measures to stabilize the machine 3 - 120 Do not swin g the upper str ucture wh en digging position high er than the m achine if the bucke on the r t teeth w ill not penetrate th e rock.
The tee essive vibration e work equipm th will slip ock surfac e and generate exc cracking of th of the ma ent or fram In addition, if the bucket tee th slip and excessive im pact load on the work equ ipment an d frame, a nd this will reduce th e service life of the machi Digging Hard Rocky Ground xcavate hard rocky ground wit Do not attem pt to directly e breaking up economy. by some other means. This will not only sav front of the tr ack or take oth before startin g the operation