. OPERATION MACHINE OPERATIONS AND CONTROLS Inversion NOTICE REMARK light NOTICE 3 - 131 The rock bucket (PC300 : if equipped, PC350 : standard ) interferes wit h the arm , so it cannot be turn ed and used for shovel Place the bucket in contact with a f lat surfac Wh contact with the grou If th e bucket is lower ed strongly to the ground, t he resistance be i ncreased and it w ill be difficult to remove the pins. Afte r removing the pins, make sure that mud or s and d oes not get on t hem.
Dus t seals are fitted at b oth ends of the bushings , be ca reful n ot to damage the Remove the doub le nut on the stopper bolt f or arm pin (A) and link pin (B), remov e the bolt, pull out arm pin ( A) and link pin (B), and then remove After removing th e bucket, reverse it. Align arm (5) with replacement bucket hole ( 1), then a lign link (6) with hole (2), c oat pins (A) and ( B) with g rease, an d install.