. MAINTENANCE MAINTENANCE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE WARNING 2. Open the engine hood. 3. Set the container to catch the fuel under the filter cartridge. 4. Using a filter wrench, turn filter cartridge (2) counterclockwise to remove it. 5. Clean the filter holder, coat the packing surface of the new filter cartridge thinly with oil, then install the filter cartridge to the filter holder. 4 - 67 EVERY 1000 HOURS MAINTENANCE Maintenance for every 50, 250 and 500 hours After the engine has been operated, all parts are a t high temperature, so do not replace the filter i mmediately. Wait for all parts to cool down bef ore starting the operation.
l piping system when the engine is running. High pressure is generated inside the engine fue When replacing the filter, wait for at least 30 sec onds after stopping the engine to let the intern al pressure go down before replacing the filt er. fire or flame close. Do not bring any NOTICE Genuine Komats u fuel filter cartridges use a sp ecial filter that has highly efficient filtering abili ty. When replacing the filter cartridge, always use a genuine Komatsu part. The common rai l fuel injection system used on this machine consists of more precise parts tha n the conventional injection pump and nozzle .
If any part other than a genuine Komatsu filter ca rtridge is used, dust or dirt may get in and caus e problems with the injection system. Always avoid using substitute parts. When carrying o ut inspection or maintenance of the fuel system, pay more attention than norma l to the entry of dirt. If dirt is stuck to any part , use fuel to wash it off complet ely. Container to ca Prepare a filter 1. Turn the valv e (1) at the bottom of the fuel position (S).