. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT Lock Pin (rear is locked) full position NOTICE Oil only flows when B mode is selected on the monitor. NOTICE Always install an additional filter in the return circuit on machines equipped with a hydraulic breaker. 6 - 6 This pin (4) lock s the control peda Position (a): Loc Position (b): Onl y front of pedal c an be o perated to ful l positio Position (c): Bot h front and rear o f pedal can be operated t When not usi ng the attachmen t, set t he lock p in to position (a).
When using a breaker, select B mode on the m onitor and set the lock pin to po When using a Crasher, select P or E mode o n the monitor and set the lock pi When using a brea ker, if the lock pin is set to position ( c) and the r ear portion (B) of the pedal is depressed, it will cause defective operation or break age of the breaker, so alwa ys set th e lock pin t o position (b) when u Breaker Circuit Additional Oil Filte r This filter (5) pre a breaker. vents deterioration of the hydraulic oil when using