Komatsu — SPECIFICATIONS

. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT the in the operation manual the cause overheating and other 6 - 18 When Using General Atta With the working mode set t o P mode or E mode, set the lock to FREE position (c) for both front or rear of the pedal to a . Set the working mode to P mode or E mode. . If it is necessary to adjus t the oil flow, see "Setting Oil Flow (PAGE 3-30)" Precautions when using Check that the stop valve Check that the working m For details of the path of t he oil, see "HYDRAULIC CIRCUIT (PAGE 6-8)". For other precautions rel ated to the handling of attachmen t, follow the provided by the attachme nt manufacturer to operate the attachment correctly.

LONG TERM STORAGE used for a long time, do as follows. OCK condition. s to the valves. CK position. neral attachment installed, operating If t he equipment is not to be used for a long time, do as follows Set the stop valve in the L Install the plug and O-ring Set the lock pin at the LO If pedal may SPECIFICATIONS Hydraulic specifications 2 liters / min. ssure for service valve cm2, 3,120 PSI) (except B mode) cm2, 3,550 PSI) (except B mode) sure for service valve cm2, 2,490 PSI) (except B mode) cm2, 2,910 PSI) (except B mode) ssure for service valve: 21.6 MPa (220 kg/cm2, 3,120 PSI) (B mod sure for service valve: 17.2 MPa (175 kg/cm2, 2,490 PSI) (B mod Max. flow at merge:

270 x Safety valve relief set pre A port: 21.6 MPa (220 kg/ B port: 24.5 MPa (250 kg/ Safety valve cracking pres A port: 17.2 MPa (175 kg/ B port: 20.1 MPa (205 kg/ Safety valve relief set pre ssure for service valve: 21.6 MPa ( 220 kg/cm2 3,120 PSI) (B mod Safety valve cracking pres sure for service valve: 17.2 MPa ( 175 kg/cm2 2,490 PSI) (B mod