. OPERATION DETAILED CONTROLS AND GAUGES is used to light up the working lamp and monitor 3 - 37 Lamp Switch This switch (5) lighting. (a) ON: Lamps (b) OFF: Lamp Machine Push- This switch (6) is used to switch the safety v alve set pressur e at the head end of th e boom cylinder to t wo leve (a) Low-pressure setting: The boo m thrus t force is weak, so the s waying of the chassis i operations, s small during digging and digging operatio ns can b e carried out smoothly. This is used for ge neral digging operatio ns on no rmal gro und, so ft rock, or blaste d rock. rusting force of the boom (b) High-pressure setting: The th become s more powerful, so it is eas y to escape from sof t ground .
Horn Switch ch (7) at the tip of the right work equipment control When the swit tip of t he right work equ ipment control lever is presse d, the horn will sou nd. One-Touch Power Max. Switch This switch (8) on the left work eq uipment control l ever is u sed to actuate the po wer max functions. Press once (s ingle click) and k one-touch pow actuate seconds at P a nd E mode