. OPERATION DETAILED CONTROLS AND GAUGES SUN ROOF WARNING equipped) Closing WINDSHIELD WARNING 3 - 43 When leaving the operator's seat , set the lock lever securely to the LOCK position. If t he lock lever is at the FREE position and the control levers or control p edals is touched by mistake , this may lead to a serious accident. Opening 1 . Set the loc k lever (1) securely to the LOCK position ( . Check for a ny ceiling window movem ent by pulling l ock knob (A) located window gra on front side, then push up and open the ceiling sping grip (B). REMARK ead guard (if equipped) o When an overh equipped) o is installed, the sun roof does not open.
Hold grasping grip (B), lower the ceiling w indow, and app ly lock ( A). If the lock cannot be applied, open the ceiling window, then p ull it in again a nd apply th When opening or closing the f ront window, bottom window, or door, a lways set the lock lever to t he LOCK position. If the lock leve r is at the FREE p osition and t he control levers o r control pedals is touched by mistak e, this may lead to a serious accident. When opening or closing the f ront window, stop the machin e on horizontal ground, lower the wor k equipment completely to the ground, st op the engine, t hen carry out the operation.
When opening the front windo w, hold the gri p securely with b oth hands , pull up, and do not let go un til the automatic lock catch is locked. When closing the front windo w, the window will move quicke r under it s own weight. Hold the grip s securely with both hands when closing it. It is possible to stow (pull up) the front wi ndow in the roo f of the o