Appendix A • Parameter Listings 152 Detroit Diesel Application User’s Manual Parameter Description ENG PWR Indicates the rated brake horsepower of the cur- rently active rating. ENG RATED RPM Indicates the rated speed of the currently active rating. LSG DROOP RPM Indicates the rated speed governor droop that is programmed in the DDEC calibration. PEAK TRQ Indicates the peak operating torque of the currently active rating. PEAK TRQ RPM Indicates the RPM at peak torque of the currently active rating. IDLE SPEED Indicates the warm engine idle speed that is pro- grammed in the DDEC calibration. IDLE ADJUST Indicates the idle RPM adjustment. TRANS Indicates the vehicle transmission type.
DYNAMIC BRAKING Indicates the enabled/disabled status of the engine fan dynamic braking feature.5 ENG BRK/SER BRK Indicates the enabled/disabled status of the engine brake engaged by the vehicle service brake feature. ENG BRAKE MIN MPH Indicates the minimum vehicle speed in which the engine brake engaged by the vehicle brake in activated. HALF ENGINE Indicates how half engine mode will depend on temperature. DATA PAGES Indicates the enabled/disabled status of the data pages feature. J1922 ABS ENABLE Indicates the enabled/disabled status of the SAE J1922 ABS communications feature. J1922 TRN ENABLE Indicates the enabled/disabled status of the SAE J1922 transmission communications feature.
J1939 ENABLED Indicates the enabled/disabled status of the SAE J1939 communications feature. H20 GOV ENABLED Indicates the enabled/disabled status of the fire truck water pressure governor feature.