Detroit Diesel — Cruise Control Configuration

DDEC Engine Parameters Detroit Diesel Application User’s Manual 159 Parameter Description VSS ANTI-TAMPER Indicates the enabled/disabled status of the “N/A” will be displayed if “VEHICLE SPD LMT”= NO or N/A. CRUISE CONTROL Indicates the enabled/disabled status of the cruise control feature that is programmed in the DDEC calibration. “N/A” will be displayed if function #20 (set/coast on) has not been configured for a vehicle switch input. MIN CRUZ Indicates the minimum cruise control speed that is programmed in the DDEC calibration. “N/A” will be displayed if cruise control “ENABLED” = NO or N/ A or “VSS ENABLED” = NO.

MAX CRUZ Indicates the maximum cruise control speed that is programmed in the DDEC calibration. AUTO RESUME Indicates the enabled/disabled status of the feature that allows automatic cruise control set speed resume. CRUZ SW VSG Indicates the enabled/disabled status of the cruise switched VSG feature that is programmed in the DDEC calibration. “N/A” will be displayed if “VSS ENABLED” = NO and/or cruise control “ENABLED” = NO or N/A. INIT RPM Indicates the cruise switched VSG initial set speed that is programmed in the DDEC calibration. “N/A” will be displayed if “CRUZ SW VSG” = NO or N/A. RPM INCR Indicates the cruise switched VSG RPM increment that is programmed in the DDEC calibration.

“N/A” will be displayed if “CRUZ SW VSG” = NO or N/A. CRUZ/ENG BRK Indicates the enabled/disabled status of the feature that allows the engine brake to be used while on cruise control if the vehicle exceeds the cruise set speed. CRUZ/ENG BRK Indicates the programmed vehicle speed above the current cruise set speed that must be reached before the engine brake will activate the medium and/or high level of retardation.