DDEC Engine Parameters Progressive Shift Calibration The following table lists the parameters available for the Progressive Shift func- tion. NOTE: i A change in any of the parameters that would cause an indicated depen- dent parameter to fall out of its valid range will result in the dependent parameter being implicitly updated as well. Detroit Diesel Application User’s Manual 177 Parameter Range Description ENABLED YES, NO or N/A Allows the progressive shifting function to be enabled. LG #1OFF SPD 12 to 27 MPH or N/A Allows the selection of Low Gear #1 turn-off speed in miles per hour or kilometers per hour.
LG #1 RPM LMT 1000 to “LG#1 MAX LMT” RPM or N/A Allows the selection of Low Gear #1 engine RPM maximum limit. LG #1 MAX LMT 1600 to “RATED” RPM1 or N/A Allows selection of Low Gear #1 turn-off RPM maximum limit. LG #2 OFF SPD 27 to 44 MPH or N/A Allows the selection of Low Gear #2 turn-off speed in miles per hour or kilometers per hour. LG #2 RPM LMT 1600 to “RATED” RPM or N/A Allows the selection of Low Gear #2 turn-off RPM maximum limit. LG #2 MAX LMT 1400 to “RATED” RPM or N/A Allows the selection of Low Gear #2 turn-off RPM maximum limit. HG ON SPD 45 to 127 MPH or N/A Select the High Gear turn-on maximum vehicle speed in miles per hour or kilometers per hour.
HG RPM LMT 1650 to “RATED” RPM or N/A Select High Gear maximum engine RPM limit (may limit the cruise control parameter VEHICLE SPD MPH)