DDEC Engine Parameters Activate ECM Output Pro-Link ® identifies the assigned functions by cavity number and description. GND - ECM is connecting this output wire to ground. OPN - ECM is open-circuiting this output wire. BAT - ECM is applying battery voltage to this output wire. % GND - indicates% of the duty cycle that the signal is at ground potential. The following table lists the ECM output cavity functions. NOTE: i Glow Plug is limited to 0-25% PWM. NOTE: i On multiple ECM engines, outputs may be for each ECM, a title for each ECM is displayed above each group of outputs. Detroit Diesel Application User’s Manual 189 Active Outputs MID:
128 ECM Range Description CHECK ENG LT OPN, GND Allows the activation of the check engine light. STOP ENG LT OPN, GND Allows the activation of the stop engine light. F3———— – N/A A2———— OPN, GND, N/A Allows the activation of the output at the vehicle connector cavity A2. N/A will be displayed if an output function has not been assigned. S3———— BAT, OPN, N/A Allows the activation of the output at the vehicle connector cavity S3. N/A will be displayed if an output function has not been assigned. T3———— BAT, OPN, N/A Allows the activation of the output at the vehicle connector cavity T3. N/A will be displayed if an output function has not been assigned.