Detroit Diesel — Maintenance Alert System

DDEC Engine Parameters Maintenance Alert System The following table lists the parameters available for the Maintenance Alert Sys- tem. Detroit Diesel Application User’s Manual 193 Parameter Description OIL LEVEL Indicates the engine oil level displays OK or ADD. Note: While the engine is running, or for a few minutes after shutting down the engine, the oil level displays UNKNOWN. COOL LEVEL Indicates the engine coolant level, determined by the Coolant Level Sensor. Will display FULL, ADD or LOW. Some engines may be equipped with an optional Second Coolant Level Sensor. AIR FILTER Indicates the condition of the Air Inlet Filter.

“ERROR” will be displayed if the Air Filter Restriction Sensor fails. Note: After replacing the filter, “PLUGGED” will be displayed until Inactive codes are cleared. OIL FILTER Indicates the condition of the Oil Filter. “ERROR” will be dis- played if the Oil Filter Restriction Sensor fails. Note: After replacing the filter, “PLUGGED” will be displayed until Inactive codes are cleared. FUEL FILTER Indicates the condition of the Fuel Filter. “ERROR” will be dis- played if the Fuel Filter Restriction Sensor fails. Note: After replacing the filter, “PLUGGED” will be displayed until Inactive codes are cleared.

FILTERS Determines the behavior of the Check Engine Light (CEL) on a maintenance alert for filters. “NO” means that the CEL will not come on. “FLASH” means it will flash at ignition on only. “CON- TINUOUS” means the light will stay on when there is an alert, but will not flash at ignition on. “BOTH’ means the light will come on continuously when the alert occurs, and will flash at ignition on. LEVELS Determines the behavior of the Check Engine Light (CEL) on a maintenance alert for fluid levels. “NO” means that the CEL will not come on. “FLASH” means it will flash at ignition on only. “CONTINUOUS” means the light will stay on when there is an alert, but will not flash at ignition on.

“BOTH’ means the light will come on continuously when the alert occurs, and will flash at ignition on.