Series 638 Parameters Data List The following table lists all data list parameters for the Series 638 engine.
Detroit Diesel Application User’s Manual 211 Parameter Units Description Water Temperature F Indicates water temperature Inlet Air Temperature F Indicates inlet air temperature Fuel Temperature F Indicates fuel temperature Veh Spd Actual km/h Indicates the current vehicle speed actual value Cruise Set Spd km/h Indicates the current cruise set speed Low Idle Set Point 1/min Indicates the low idle set point Rotational Spd 1/min Indicates the rotational speed as read by the flywheel sensor Secondary Spd 1/min Indicates the secondary speed as read by the #1 injector Position Govnr mV Indicates actual fuel quantity Req Fuel Qty V Indicates the requested fuel quantity Accel Pedal % Indicates the value of the accelerator pedal sensor Boost Prs hPa Indicates the boost pressure/intake manifold pressure Atmospheric Prs hPa Indicates the atmospheric pressure Battery Voltage V Indicates the battery voltage Current Inj Qty mg/Hub Indicates the current injection quantity Demand Qty Driver mg/Hub Indicates the Demand Quantity Driver Max Inj Qty mg/Hub Indicates the maximum injection quantity.
Supply Accel Pedal V Indicates the supply-accelerator pedal sensor.