Detroit Diesel — Viewing ECM Ins/Outs

Viewing Calibrations Viewing ECM Ins/Outs Use the ECM INs/OUTs option to view ECM Input and Output Configuration informa- tion that is currently programmed in the DDEC III/IV calibration, via the Pro-Link ® . Please keep the following in mind when viewing the ECM Input/Output data on the Pro-Link ® screen: The value for each of the parameters may be displayed as “FUNCTION DESCRIPTION” or “NONE”. “N/A” will be displayed if a function number of 0 has been assigned to any of the connector cavities. The connector cavity designations describe the physical locations of the assigned functions. NOTE: i See “ECM Input/Output Configuration”, on page 162 for a list of all ECM Input/Output parameters.

NOTE: i For Multi-ECM Engines, there will be a separate menu for R1 (MID 175) and R2 (MID 183). To view ECM Ins/Outs information: 1 From the Engine Menu , select VIEW CALIBRATIONS . ENGINE MENU ----Selections---- VIEW CALIBRATIONS Detroit Diesel Application User’s Manual 35