Chapter 3 • Using the Engine Application 2 Select RESPONSE TIMES . The screen displays a message indicating that the data is being requested, then displays the data. For example: INJECTOR 1 1.01 ms INJECTOR 5 1.06 ms INJECTOR 3 1.17 ms INJECTOR 6 1.11 ms 3 Press the or key to scroll through the screen data, as needed. 4 Press to exit the screen. Viewing and Updating CAL Information The injector calibration codes are used by the DDEC III/IV ECM to equalize the outputs of the engine injectors. This allows the ECM to perform optimum cylinder power balancing. Each injector has a unique calibration code, which is indicated on the injector label. NOTE:
i See “Injector Calibration”, on page 167 for a list of the calibrations for all cylinders. To view injector calibration information: 1 Be sure that the FUEL INJECTOR INFO menu is displaying. FUEL INJECTOR INFO ----Selections---- CYLINDER CUTOUT 50 Detroit Diesel Application User’s Manual